Cisco CISCO2691, High Perf 10/100 Dual Eth Router w/3 WIC,1 NM,32F/256D.
Linkom-PC is your source for Refurbished Cisco CISCO2691. Most Cisco CISCO2691 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco CISCO2691 Technical Specifications
Dimensions & Weight |
Depth: |
28.5 cm |
Height: |
8.8 cm |
Weight: |
6.8 kg |
Width: |
43.2 cm |
Environmental Parameters |
Humidity Range Operating: |
5 – 95% |
Max Operating Temperature: |
40 °C |
Min Operating Temperature: |
0 °C |
Expansion / Connectivity |
Expansion Slots: |
5 (total) / 5 (free) x expansion slot ¦ Memory ¦ 1 (total) / 0 (free) x CompactFlash |
Installed Modules Qty (Max): |
0 (installed) / 5 (max) |
Interfaces: |
2 x 10Base-T/100Base-TX – RJ-45 – 2 ¦ Management: 1 x console – RJ-45 – 1 ¦ Serial: 1 x auxiliary – RJ-45 – 1 |
General |
Authentication Method: |
RADIUS |
Compliant Standards: |
IEEE 802.3, IEEE 802.3u |
Connectivity Technology: |
Wired |
Data Link Protocol: |
Ethernet, Fast Ethernet |
Data Transfer Rate: |
100 Mbps |
Device Type: |
Router |
Enclosure Type: |
Rack-mountable – modular – 2U |
Features: |
Flow control, modular design, full duplex capability, 56-bit encryption, 128-bit encryption, NAT support, VPN support, manageable |
Flash Memory: |
32 MB (installed) / 128 MB (max) |
Processor: |
1 x 160 MHz |
RAM: |
256 MB (installed) / 256 MB (max) – SDRAM – DIMM 168-PIN |
Remote Management Protocol: |
RMON |
Routing Protocol: |
OSPF, BGP |
Status Indicators: |
Port status, power, 100M device connected, link/activity |
Miscellaneous |
Rack Mounting Kit: |
Optional |
Power |
Power Device: |
Internal power supply – 105 Watt |
Voltage Required: |
AC 120/230 V (50/60 Hz) |