Cisco CISCO2691, High Perf 10/100 Dual Eth Router w/3 WIC,1 NM,32F/256D

255,00

High Perf 10/100 Dual Eth Router w/3 WIC,1 NM,32F/256D

Available on backorder

Description

Cisco CISCO2691, High Perf 10/100 Dual Eth Router w/3 WIC,1 NM,32F/256D.

Linkom-PC is your source for Refurbished Cisco CISCO2691. Most Cisco CISCO2691 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO2691 Technical Specifications

Dimensions & Weight
Depth:28.5 cm
Height:8.8 cm
Weight:6.8 kg
Width:43.2 cm
Environmental Parameters
Humidity Range Operating:5 – 95%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Expansion Slots:5 (total) / 5 (free) x expansion slot ¦ Memory ¦ 1 (total) / 0 (free) x CompactFlash
Installed Modules Qty (Max):0 (installed) / 5 (max)
Interfaces:2 x 10Base-T/100Base-TX – RJ-45 – 2 ¦ Management: 1 x console – RJ-45 – 1 ¦ Serial: 1 x auxiliary – RJ-45 – 1
General
Authentication Method:RADIUS
Compliant Standards:IEEE 802.3, IEEE 802.3u
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet
Data Transfer Rate:100 Mbps
Device Type:Router
Enclosure Type:Rack-mountable – modular – 2U
Features:Flow control, modular design, full duplex capability, 56-bit encryption, 128-bit encryption, NAT support, VPN support, manageable
Flash Memory:32 MB (installed) / 128 MB (max)
Processor:1 x 160 MHz
RAM:256 MB (installed) / 256 MB (max) – SDRAM – DIMM 168-PIN
Remote Management Protocol:RMON
Routing Protocol:OSPF, BGP
Status Indicators:Port status, power, 100M device connected, link/activity
Miscellaneous
Rack Mounting Kit:Optional
Power
Power Device:Internal power supply – 105 Watt
Voltage Required:AC 120/230 V (50/60 Hz)

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.