Description
Cisco C897VA-K9, Cisco 897 VDSL2/ADSL2+ over POTs and 1GE/SFP Sec Router.
Cisco 890 Series Integrated Services Routers combine Internet access, comprehensive security, and wireless services in a single, secure device that is easy to deploy and manage. The best-in-class Cisco 890 series architecture has been specifically designed to deliver high performance with concurrent services, business continuity, and investment protection for enterprise small branch offices and service provider managed services applications.
Cisco 890 Series Integrated Services Routers are fixed-configuration routers that provide collaborative business solutions for secure voice and data communications to enterprise small branch offices. They are designed to deliver secure broadband, Metro Ethernet, wireless LAN (WLAN) connectivity, and business continuity. The routers also come with powerful management tools, such as the web-based Cisco Configuration Professional configuration management tool, which simplifies setup and deployment. Centralized management capabilities give network managers visibility and control of the network configurations at the remote site.
Linkom-PC is your source for Refurbished Cisco C897VA-K9. Most Cisco C897VA-K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco C897VA-K9 Technical Specifications
Communications | |
---|---|
Digital Signaling Protocol: | ADSL2, ADSL2+, VDSL2 |
Protocols & Specifications: | ITU G.994.1 (G.hs), ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A |
Type: | DSL modem |
Dimensions & Weight | |
---|---|
Depth: | 24.8 cm |
Height: | 4.4 cm |
Width: | 32.3 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 – 85% (non-condensing) |
Max Operating Temperature: | 40 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x memory |
Interfaces: | LAN: 8 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ WAN: 1 x SFP (mini-GBIC) ¦ WAN: 1 x VDSL / ADSL2+ ¦ Management: 1 x console – RJ-45 ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x 1000Base-T – RJ-45 ¦ WAN: 1 x BRI |
General | |
---|---|
Authentication Method: | RADIUS, TACACS+ |
Capacity: | IPSec VPN tunnels: 50 |
Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, IEEE 802.1x, IEEE 802.3ah, IEEE 802.1ag, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN 61000-6-1, AES, FCC CFR47 Part 15, VCCI V-3 |
Connectivity Technology: | Wired |
Data Link Protocol: | Ethernet, Fast Ethernet, Gigabit Ethernet |
Device Type: | Router – 8-port switch (integrated) |
Enclosure Type: | Desktop |
Encryption Algorithm: | Triple DES, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
Features: | Firewall protection, NAT support, power over Ethernet (PoE), VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DiffServ support, MAC address filtering, IPv6 support, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), RADIUS support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD), DHCP relay, DHCP client, Virtual Routing and Forwarding (VRF), Class of Service (CoS) |
Flash Memory: | 256 MB (installed) / 256 MB (max) |
Network / Transport Protocol: | L2TP, RSVP, ICMP/IP, IPSec, FTP, DHCP, DNS, L2TPv3 |
RAM: | 512 MB (installed) / 1 GB (max) |
Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
Routing Protocol: | OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, OSPFv3, policy-based routing (PBR), BGP-4+, WCCP, Bidirectional Forwarding Detection (BFD) |
Status Indicators: | Port status, power, PoE |
Line Properties | |
---|---|
Framing Format: | ANSI T1.413 |
Power | |
---|---|
Power Device: | External power adapter – 60 Watt |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
OS Provided: | Cisco IOS Advanced IP services |