Cisco C887VAGW+7-A-K9, VDSL2/ADSL2+ over POTS and 3G HSPA+ R7 with SMS/GPS FCC WLAN

1.699,00

VDSL2/ADSL2+ over POTS and 3G HSPA+ R7 with SMS/GPS FCC WLAN

Available on backorder

Description

Cisco C887VAGW+7-A-K9, VDSL2/ADSL2+ over POTS and 3G HSPA+ R7 with SMS/GPS FCC WLAN.

Linkom-PC is your source for Refurbished Cisco C887VAGW+7-A-K9. Most Cisco C887VAGW+7-A-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco C887VAGW+7-A-K9 Technical Specifications

Aerial
Aerial:External detachable
Antenna Qty:3
Directivity:Omni-directional
Gain Level:2 dBi
Communications
Cellular Protocol:GPRS, UMTS, EDGE, HSPA, HSPA+
Digital Signaling Protocol:ADSL2, ADSL2+, VDSL2
Protocols & Specifications:ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5, ITU G.993.2
Type:DSL modem / wireless cellular modem
Environmental Parameters
Humidity Range Operating:10 – 85% (non-condensing)
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2
General
Authentication Method:RADIUS, TACACS+
Capacity:IPSec VPN tunnels: 20
Compliant Standards:IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386
Connectivity Technology:Wireless, wired
Data Link Protocol:Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type:Wireless router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:LEAP, DES, Triple DES, SSL, PEAP, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD)
Flash Memory:256 MB
Frequency Band:2.4 GHz / 5 GHz
Network / Transport Protocol:L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS
RAM:512 MB (installed) / 512 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin
Remote Management Protocol:Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE, policy-based routing (PBR)
Status Indicators:Port status, power
Line Properties
Framing Format:ANSI T1.413
Power
Power Device:External power adapter – 60 Watt
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided:Cisco IOS Advanced Security

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.