Description
Cisco C887VA-W-E-K9, Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp.
The Cisco 880 ISR provides Internet, VPN, data, and backup capability to corporate teleworkers and remote and small offices of fewer than 20 users. These routers are capable of bridging and multiprotocol routing between LAN and WAN ports, and provide advanced features such as antivirus protection.
Linkom-PC is your source for Refurbished Cisco C887VA-W-E-K9. Most Cisco C887VA-W-E-K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco C887VA-W-E-K9 Technical Specifications
| Communications | |
|---|---|
| Digital Signaling Protocol: | ADSL2, ADSL2+, VDSL2 |
| Protocols & Specifications: | ITU G.994.1 (G.hs), ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A |
| Type: | DSL modem |
| Dimensions & Weight | |
|---|---|
| Depth: | 26.4 cm |
| Height: | 4.4 cm |
| Weight: | 2.5 kg |
| Width: | 32.5 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 10 – 85% (non-condensing) |
| Max Operating Temperature: | 40 °C |
| Min Operating Temperature: | 0 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 1 (total) / 1 (free) x SO-DIMM 200-pin |
| Interfaces: | LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2 |
| General | |
|---|---|
| Authentication Method: | RADIUS, Radio Service Set ID (SSID), TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST |
| Capacity: | IPSec VPN tunnels: 20 |
| Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 |
| Connectivity Technology: | Wired |
| Data Link Protocol: | Ethernet, Fast Ethernet |
| Device Type: | Router – 4-port switch (integrated) |
| Enclosure Type: | Desktop |
| Encryption Algorithm: | LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Features: | Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Flash Memory: | 128 MB |
| Network / Transport Protocol: | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
| RAM: | 256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin |
| Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
| Routing Protocol: | RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR) |
| Status Indicators: | Port status, power |
| Line Properties | |
|---|---|
| Framing Format: | ANSI T1.413 |
| Power | |
|---|---|
| Power Device: | External power adapter – 60 Watt |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| OS Provided: | Cisco IOS Advanced Security |
