Cisco C887VA-V-K9, Cisco887, V/ADSL2 WAN, 4 FXS, 2BRI, 1ISDN

515,00

Cisco887, V/ADSL2 WAN, 4 FXS, 2BRI, 1ISDN

Available on backorder

Description

Cisco C887VA-V-K9, Cisco887, V/ADSL2 WAN, 4 FXS, 2BRI, 1ISDN.

Linkom-PC is your source for Refurbished Cisco C887VA-V-K9. Most Cisco C887VA-V-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco C887VA-V-K9 Technical Specifications

Communications
Digital Signaling Protocol:ADSL2, ADSL2+
Protocols & Specifications:ITU G.994.1 (G.hs), ITU G.992.1 (G.DMT) Annex A, ITU G.992.1 (G.DMT) Annex B, ITU G.992.3 Annex A, ITU G.992.5 Annex M, ITU G.992.3 Annex M, ITU G.992.5 Annex A, ITU G.992.5 Annex B, ITU G.992.3 Annex B
Type:ISDN / DSL modem combo
Dimensions & Weight
Depth:24.9 cm
Height:4.4 cm
Weight:2.5 kg
Width:32.5 cm
Environmental Parameters
Humidity Range Operating:10 – 85% (non-condensing)
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Expansion Slots:1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ Phone line: 4 x FXS ¦ 2 x BRI
General
Authentication Method:RADIUS, TACACS+
Capacity:IPSec VPN tunnels: 20
Compliant Standards:IEEE 802.1D, IEEE 802.1Q, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet
Device Type:Router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:LEAP, DES, Triple DES, PEAP, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, dynamic DNS server, DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, DNS proxy
Flash Memory:128 MB
Network / Transport Protocol:L2TP, ICMP/IP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS
RAM:256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin
Remote Management Protocol:Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE, static IPv4 routing, static IPv6 routing, policy-based routing (PBR)
Status Indicators:Port status, power
IP Telephony
IP Telephony Features:Echo cancellation, comfort noise generation (CNG), Caller ID, silence suppression
Telephony Interfaces:4 phone (FXS), 2 phone (ISDN BRI)
VoIP Functionality:VoIP gateway
VoIP Protocols:MGCP, SCCP, SIP, H.323 v3, H.323 v4, H.323 v1, H.323 v2
Voice Codecs:G.711, G.723.1, G.728, G.729, G.729ab, G.726
Line Properties
Framing Format:ANSI T1.413
Miscellaneous
Cables Included:1 x network cable ¦ 1 x modem cable
Power
Power Device:External power adapter – 60 Watt
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided:Cisco IOS Advanced IP services

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.