Description
Cisco C886VAG+7-K9, VDSL2/ADSL2+ over ISDN (non-US) 3.7G HSPA+ R7 w/ SMS/GPS.
The Cisco® 880G Series Integrated Services Router with the embedded third-generation (3G) wireless WAN (WWAN) and dual radio 802.11n wireless LAN (WLAN) capabilities option provides secure high-speed wireless WAN and LAN connectivity to small businesses, enterprise small branch offices, and teleworker sites (Figure 1). Transparently integrated into the enterprise-class feature set available on the Cisco 880 Series, 3G, and WiFi wireless connectivity allows for rapid installation, deployment flexibility, and resilient mobile broadband backhaul for primary, WAN backup, and WiFi LAN.
Linkom-PC is your source for Refurbished Cisco C886VAG+7-K9. Most Cisco C886VAG+7-K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco C886VAG+7-K9 Technical Specifications
Communications | |
---|---|
Digital Signaling Protocol: | ADSL2+ over ISDN, VDSL2 over ISDN |
Protocols & Specifications: | ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5, ITU G.992.1 (G.DMT) Annex A, ITU G.992.1 (G.DMT) Annex B |
Type: | ISDN / DSL modem combo |
Dimensions & Weight | |
---|---|
Depth: | 24.9 cm |
Height: | 4.4 cm |
Weight: | 2.5 kg |
Width: | 32.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 – 85% (non-condensing) |
Max Operating Temperature: | 40 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x SO-DIMM 200-pin |
Interfaces: | LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST |
General | |
---|---|
Authentication Method: | RADIUS, TACACS+ |
Capacity: | IPSec VPN tunnels: 20 |
Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 |
Connectivity Technology: | Wired |
Data Link Protocol: | Ethernet, Fast Ethernet |
Device Type: | Router – 4-port switch (integrated) |
Enclosure Type: | Desktop |
Encryption Algorithm: | DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
Features: | Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, dynamic DNS server, DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, DNS proxy |
Flash Memory: | 128 MB |
Network / Transport Protocol: | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
RAM: | 256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin |
Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
Routing Protocol: | RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR) |
Status Indicators: | Port status, power |
Line Properties | |
---|---|
Framing Format: | ANSI T1.413 |
Miscellaneous | |
---|---|
Pricing Type: | Refurbished |
Power | |
---|---|
Power Device: | External power adapter – 60 Watt |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
OS Provided: | Cisco IOS Advanced Security |