Cisco C881SRST-K9, SRST881 ENet FXS – FXO Sec Router.
Linkom-PC is your source for Refurbished Cisco C881SRST-K9. Most Cisco C881SRST-K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco C881SRST-K9 Technical Specifications
| Dimensions & Weight | |
|---|---|
| Depth: | 24.9 cm |
| Height: | 4.4 cm |
| Width: | 32.5 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 10 – 85% |
| Max Operating Temperature: | 40 °C |
| Min Operating Temperature: | 0 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x SO-DIMM 200-pin |
| Interfaces: | LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ USB: 1 x 4 pin USB Type A |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+ |
| Compliant Standards: | IEEE 802.1D, IEEE 802.1Q |
| Connectivity Technology: | Wired |
| Data Link Protocol: | Ethernet, Fast Ethernet |
| Device Type: | Router – 4-port switch (integrated) |
| Enclosure Type: | Desktop |
| Encryption Algorithm: | LEAP, DES, Triple DES, MD5, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Features: | Auto-sensing per device, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), MAC address filtering, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Flash Memory: | 256 MB |
| Network / Transport Protocol: | L2TP, IPSec |
| RAM: | 512 MB (installed) / 768 MB (max) DDR2 SDRAM – SO-DIMM 200-pin |
| Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH |
| Routing Protocol: | RIP-1, RIP-2, HSRP, VRRP, GRE |
| Status Indicators: | Port status, power |
| IP Telephony | |
|---|---|
| Telephony Interfaces: | 1 line (FXO), 4 phone (FXS) |
| VoIP Functionality: | VoIP phone adapter |
| VoIP Protocols: | MGCP, SCCP, SIP, H.323 v3, H.323 v4, H.323 v1, H.323 v2 |
| Voice Codecs: | G.711, G.723.1, G.728, G.729, G.729ab, G.726 |
| Power | |
|---|---|
| Power Device: | External power adapter – 60 Watt |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| OS Provided: | Cisco IOS Advanced IP services |