Site icon Linkom-PC

Cisco C819HGW+7-E-K9, C819 M2M Hardened 3.7G HSPA+ (non-US) w/ Dual Radio ETSI

Cisco C819HGW+7-E-K9, C819 M2M Hardened 3.7G HSPA+ (non-US) w/ Dual Radio ETSI

Cisco C819HGW+7-E-K9, C819 M2M Hardened 3.7G HSPA+ (non-US) w/ Dual Radio ETSI

Cisco C819HGW+7-E-K9, C819 M2M Hardened 3.7G HSPA+ (non-US) w/ Dual Radio ETSI.

Linkom-PC is your source for Refurbished Cisco C819HGW+7-E-K9. Most Cisco C819HGW+7-E-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

Cisco C819HGW+7-E-K9 Technical Specifications

Aerial
Aerial: External detachable
Antenna Qty: 5
Communications
Cellular Protocol: GPRS, UMTS, EDGE, HSDPA, HSPA+
Max Transfer Rate: 21 Mbps
Type: Wireless cellular modem
Dimensions & Weight
Depth: 22.9 cm
Height: 4.4 cm
Weight: 1.54 kg
Width: 18.6 cm
Environmental Parameters
Max Operating Temperature: 60 °C
Min Operating Temperature: -25 °C
Expansion / Connectivity
Expansion Slots: 2 (total) / 2 (free) x SIM
Interfaces: WAN: 1 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x RJ-45 ¦ USB: 1 x mini-USB Type A
General
Authentication Method: RADIUS, TACACS+
Capacity: Connection / user qty: 20
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.11ac, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, FCC CFR47 Part 15, UL 60950-1 Second Edition, EN 301.511, BSMI CNS 13438, EN 301.908, VCCI V-3, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, EN 301.489-7, EN 301.489-24, EN 301 489-1, EN 300 386
Connectivity Technology: Wireless, wired
Data Link Protocol: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Device Type: Wireless router – 4-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: DES, Triple DES, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features: Firewall protection, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, content filtering, DiffServ support, MAC address filtering, IPv6 support, Intrusion Prevention System (IPS), firmware upgradable, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Dynamic Multipoint VPN (DMVPN), RADIUS support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, CleanAir technology, DHCP relay, DHCP client
Flash Memory: 1 GB (installed) / 1 GB (max)
Frequency Band: 2.4 GHz / 5 GHz
Network / Transport Protocol: L2TP, IPSec, DHCP, L2TPv3, DDNS
RAM: 1 GB (installed) / 1 GB (max)
Remote Management Protocol: Telnet, SNMP 3, HTTP, SSH, CLI
Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD)
Status Indicators: System, active, wireless
Miscellaneous
MTBF: 293,000 hours
Power
Power Consumption Operational: 20 Watt
Power Device: External power adapter
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS Advanced IP services
Exit mobile version