Description
Cisco C819G-4G-GA-K9, C819 M2M 4G LTE for Global, 800/900/1800/2100/2600 MHz,HSPA+.
The Cisco 819 Non-Hardened 4G LTE Integrated Services Routers (ISR) are the smallest Cisco IOS Software routers with support for integrated fourth-generation (4G LTE) wireless WAN (mobile broadband backhaul) capabilities. They are rapidly deployable, highly available, reliable, and secure, and are designed specifically for machine-to-machine (M2M) applications. Markets that benefit from these applications include small business, financial, healthcare, and retail. Fully integrated with Cisco IOS Software, the Cisco 819 4G LTE ISRs deliver enterprise-class features, including highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links.
Linkom-PC is your source for Refurbished Cisco C819G-4G-GA-K9. Most Cisco C819G-4G-GA-K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco C819G-4G-GA-K9 Technical Specifications
| Aerial | |
|---|---|
| Aerial: | External detachable |
| Antenna Qty: | 2 |
| Communications | |
|---|---|
| Cellular Protocol: | GSM, GPRS, UMTS, EDGE, HSPA+, LTE |
| Max Transfer Rate: | 100 Mbps |
| Type: | Wireless cellular modem |
| Dimensions & Weight | |
|---|---|
| Depth: | 18.3 cm |
| Height: | 4.2 cm |
| Weight: | 1 kg |
| Width: | 19.6 cm |
| Environmental Parameters | |
|---|---|
| Max Operating Temperature: | 50 °C |
| Min Operating Temperature: | -10 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 2 (total) / 2 (free) x SIM |
| Interfaces: | WAN: 1 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x RJ-45 ¦ USB: 1 x mini-USB Type A |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+ |
| Capacity: | IPSec VPN tunnels: 20 |
| Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, FCC CFR47 Part 15, UL 60950-1 Second Edition, EN 301.511, BSMI CNS 13438, EN 301.908, VCCI V-3, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, EN 301.489-7, EN 301.489-24, EN 301 489-1, EN 300 386 |
| Connectivity Technology: | Wired |
| Data Link Protocol: | Ethernet, Fast Ethernet |
| Device Type: | Router – 4-port switch (integrated) |
| Enclosure Type: | Desktop |
| Encryption Algorithm: | DES, Triple DES, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Features: | NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DiffServ support, MAC address filtering, IPv6 support, firmware upgradable, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), RADIUS support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DHCP relay, DHCP client, Class of Service (CoS), DiffServ Code Point (DSCP) support |
| Flash Memory: | 1 GB (installed) / 1 GB (max) |
| Network / Transport Protocol: | IPSec |
| RAM: | 1 GB (installed) / 1 GB (max) |
| Remote Management Protocol: | Telnet, SNMP 3, HTTP, SSH, CLI |
| Routing Protocol: | OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, NHRP, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD) |
| Status Indicators: | System, active, 3G |
| Miscellaneous | |
|---|---|
| MTBF: | 293,000 hours |
| Power | |
|---|---|
| Power Device: | External power adapter |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| OS Provided: | Cisco IOS Universal |
