Description
Cisco ASR1002-10G-SEC/K9, ASR1002 VPN+FW Bundle w/ ESP-10G,AESK9,License,4GB DRAM.
The Cisco ASR 1000 Series provides a significant enhanced value compared to prior generations of Cisco midrange routing solutions by providing more than tenfold performance improvement with services running. Additionally, the routers have hardware and software redundancy, as well as an industry-leading high-availability design.
The Cisco ASR 1002 Router in a 2-Rack Unit (RU) form factor comes with an integrated route and serial interface processors. It houses three shared port adapter (SPA) slots supporting single height and dual height SPAs. It is an ideal solution for a large branch office or as a managed high-speed customer premises equipment (CPE) device to support enhanced features such as security, deep packet inspection, and firewall.
The Cisco ASR 1000 Series ESP is responsible for data-plane processing tasks, and all network traffic flows through them, enhancing a range of advanced services from service provider broadband and edge services to enterprise-level WAN aggregation and IP gateway services.
Linkom-PC is your source for Refurbished Cisco ASR1002-10G-SEC/K9. Most Cisco ASR1002-10G-SEC/K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco ASR1002-10G-SEC/K9 Technical Specifications
| Dimensions & Weight | |
|---|---|
| Depth: | 55.6 cm |
| Height: | 8.9 cm |
| Width: | 43.7 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 5 – 90% |
| Max Operating Temperature: | 40 °C |
| Min Operating Temperature: | 5 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 3 (total) / 3 (free) x expansion slot ¦ 1 (total) / 0 (free) x processor board |
| Installed Modules Qty (Max): | 1 (installed) / 4 (max) |
| Interfaces: | Management: 1 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ Management: 1 x auxiliary – RJ-45 ¦ 4 x SFP (mini-GBIC) |
| General | |
|---|---|
| Authentication Method: | Secure Shell (SSH) |
| Capacity: | Concurrent L2TP VPN tunnels: 12000 ¦ Concurrent sessions: 24000 ¦ IPv4 routes: 1000000 ¦ IPv6 routes: 500000 |
| Compliant Standards: | CISPR 24, EN55022, VCCI Class A ITE, EN55024, CISPR 22, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, AS/NZS 60950-1, AS/NZ 3548 Class A, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, EN 300 386 |
| Connectivity Technology: | Wired |
| Device Type: | Router – with Cisco ASR 1000 Series Embedded Services Processor, 10Gbps |
| Enclosure Type: | Desktop, rack-mountable – modular – 2U |
| Encryption Algorithm: | Triple DES, AES |
| Features: | Firewall protection, NAT support, VPN support, MPLS support, IPv6 support, Stateful switchover (SSO), Access Control List (ACL) support, Quality of Service (QoS), MPLS VPN, software redundancy |
| Network / Transport Protocol: | L2TP, IPSec |
| Performance: | Bandwidth: 10 Gbps |
| RAM: | 4 GB |
| Remote Management Protocol: | Telnet, SNMP 3, SSH |
| Miscellaneous | |
|---|---|
| Rack Mounting Kit: | Included |
| Power | |
|---|---|
| Installed Qty: | 2 (installed) / 2 (max) |
| Power Device: | Internal power supply |
| Power Redundancy: | Yes |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| OS Provided: | Cisco IOS Advanced Enterprise Services |
