Inverto TV IDL 400s Advanced SAT-to-IP Multi-Screen Server – airscreen Server™

Inverto TV IDL 400s Advanced SAT-to-IP Multi-Screen Server – airscreen Server™

The airscreen Server™  (IDL 400s) is a fully compliant and certified SAT>IP Server with 4 tuners. The airscreen Server™ can receive up to 4 transponders and stream selected SD/HD TV & Radio programs to 4 Client devices over LAN/WLAN allowing users to watch live satellite TV on their tablets, smart phones, smart TVs, game consoles and connected video player devices with compatible software/application.

Inverto TV IDL 400s airscreen server SAT-to-IP

The airscreen Server™ streams out programs that were selected by the SAT>IP Clients and maintains encryption (for pay-TV channels) intact. The airscreen Server™ features a DLNA/UPnP-compatible Server mode that allows DLNA/UPnP Client devices and applications (that are not SAT>IP compatible Clients) such as DLNA-compatible TVs or Media Players to access the Live satellite TV and Radio streams over the LAN/WLAN too. DLNA/UPnP Clients access and navigate through live TV programs using a channel list provided by the airscreen Server™. The channel list can be edited/exported/imported through the device’s configuration and management menus which are accessible over a simple and intuitive web interface. Through its built in DLNA/UPnP compatible server, the airscreen Server™ will soon be able to turn a connected USB drive into a network media share for the Client devices to access around the home or set as a local network PVR.

The airscreen Server™ can be connected to the home LAN/WLAN router/access point over its Ethernet port via an Ethernet cable or through a HomePlug AV or PLC (Ethernet over power line) adaptors. The development of the SAT>IP protocol was led by SES-Astra for its customers who are seeking to benefit from the increasing popularity of tablet and smart phone devices and address the change in how viewers consume their TV content and their ultimate demand for TV anywhere on any screen. Apart of the initial satellite version, terrestrial and cable front ends are coming soon.

For more information on the SAT>IP technology please visit:

Product Highlights:

■ 4 Satellite input signals streaming out selected TV/Radio programs to 4 users

■ Web-based device configuration and management 

■ Support SAT>IP Communication Protocol

■ Support MPEG2 TS and PS over IP, Unicast and Multicast

■ Support Unicable and DiSEqC protocols

■ Firmware update over USB stick, internet

Supported Clients:

■ iOS (iPad) and Android Tablets and Smart phones

■ UPnP/DLNA-compliant connected media players and video streamers

■ UPnP/DLNA-compliant Smart TV sets

■ PC client – Windows Media Player, VLC player and DVB viewer

■ Connected game consoles

■ SAT-IP-compliant Clients


Sat IF inputs x4 F-connectors, each with independent control (13/18V, 0/22KHz DiSEqC)
Network (Ethernet) x1 RJ45, 1GbE
Front ends x4 DVB-S2
Network protocols Fully compliant and certified SAT>IP Server stack
UPnP/DLNA-compatible server
USB x2 USB 2.0 host ports
Management Web-based configuraion; password protected login
Power supply External AC/DC adaptor, Main Input 100-240VAC ~, 50/60 Hz
DC Output to receiver 12V, 3A (max power consumption for all Front-end
is 15W = equivalent to 800mA total LNB load).
Operating mode: max. 30W
Control and Display x1 On/Off switch button
x4 Client LED, x1 Network activity LED,  x1 On/Off LED
x1 reset button
Accessories Installation Manual in 2 languages
AC/DC power adaptor
Size W 190mm x D 170mm x H 40mm
Regulations CE compliance: 2004/108/EC (EMC Directive),
2006/95/EC (Low Voltage Directive),
2011/65/EC (RoHS Directive),
2009/125/EC (Eco-design Directive): Commission Regulation (EC) No 278/2009 (power consumption of external power supplies)

Оставите одговор